Hardness Tester TH1200
- 7” capacitive touch screen colour display.
- 12 Position Carousal for Automatic measurement of tablet parameters - Thickness, Length/Diameter, Weight, Width & Hardness.
- Non-Volatile memory storage of 100 methods with parameters with Alphanumeric entries of Sample Name and Identification Number for authentication.
- Automatic run can be performed continuously up to 1-100 tablets.
- Linear Displacement 0.4, 0.8, 1.2, 1.6, 2.0, 2.4, 2.8 ,3.2 mm/sec with fast advance and return movement of breaking arm saves runtime.
- Daily Auto Incremented Run Number and Factory entered Customer name with Instrument Serial Number on report system foolproof and GLP compliant.
- Two Tier - a) ADMIN, and b) USER password protection for method editing and Validation. 50 Users can be set with Name and password
- Built-in Real Time Clock (RTC) for date and time display and on printout.
- Result resolution - 0.1/1N, 0.01mm, 0.01cm, 0.001inch as per unit selected.
- Process Stage and Compression Press no. entry and Percentage Limit for detected values of Hardness, Length & Thickness with Star mark for out of limit values.
- Calibration & verification protocol for Hardness: 3 point calibration & verification with standard weights.
- Calibration & verification protocol for Thickness: 3 point calibration & verification with standard thickness gauges.
- Quick RUN for Thickness, Length & Hardness or all parameter measurement in sequence up to 25 sample tablets with GLP information.
- Error indication on display helps user to trace the problem
- Printer Compatibility for Deskjet, Inkjet & Dot-matrix printer.
- PC Based Data downloading facility using EDC 21 software
- Customizable Report File
- Preview Result data before printing
- Auto Resume facility to continue the run in case power failure
- Data backup to SD card & restore facility available
- User can easily adjust brightness of screen
|
|
a) Control: Micro-controller based (Advanced microprocessor)
b) Display: 7’’ inch capacitive touch screen color display
c) Test Parameters: No of Tablets = 1 - 100 |
|
|
a) Measuring Sensor: Linear Transducer
b) Measuring Range: 0.1mm to 15.0mm
c) Measuring Unit: mm or inch
d) Measuring Accuracy: better than ± 0.05mm |
|
|
a) Measuring Sensor: Stepper controlled Load Touch sensed
b) Measuring Range: 0.1mm to 15.0mm
c) Measuring Unit: mm or inch
d) Measuring Accuracy: better than ± 0.05mm |
|
|
a) Measuring Sensor: Stepper controlled Load Touch sensed
b) Measuring Range: Diameter 0.5mm to 25.0mm
c) Measuring Unit: mm or inch
d) Measuring Accuracy: better than ± 0.05mm |
|
|
a) Linear Displacement: 0.4,0.8,1.2,1.6, 2.0, 2.4, 2.8, 3.2 mm/sec with fast advance and return of breaking arm
b) Measuring Sensor: Load Cell - Strain gauge
c) Measuring Range: 2N to 500 N (600N - Optional)
d) Measuring Unit: N (Newton’s)/ Kp (Kilo Ponds)/ kgf Sc (Strong Cobb) / lbs / Pound
e) Measuring Accuracy : ± 1N |
|
|
Manual Entry by User (for reporting purpose) |
|
|
Sartorius / Mettler when Automatic Wt. Transfer optionis selected |
|
|
100 method with Non-Volatile memory |
|
|
Practically unlimited Test Reports with Date and time stamp |
|
|
a) Linear Displacement: GLP & Pharmacopoeia compliant report with Statistics (Avg, Min, Max and RSD)
b) Program parameter Report.
c) Calibration Reports |
|
|
a) Printer connectivity : Centronics parallel port for Dot matrix/ Desk jet Printer.
b) Serial Interface : RS232 C-1 for Balance connectivity (Sartorius/Mettler) |
|
|
20 kgs |
|
|
345W x 270H x 425D mm ± |
|
|
110 / 230Vac, ± 10%, 60 / 50 Hz, 50W. option available ±± |
|
|
a) Operation: Indoor
b) Temperature: Ambient to 45°C
c) Humidity: 5 to 90% non-condensing.
c) Altitude: upto 2000 |