Tap Density Tester TD2025

Labindia’s Tap Density Tester, measures the tapped density of powders, granules and similar products. The tester offers a standardized and repeatable method of measuring tapped volumes of powders. The unit provides users friendly operation.

Call On: +91 9136909578

Sales Support: sales.mfd@labindia.com

Service Support: servicecoordinator@labindia.com

Standard Features of Tap density tester TD2025

7” Colour High resolution Display with Touch Screen Interface with User interactive software.
Designed to meet current USP and ASTM specifications for tap density testing.
Two Tapping Positions for 14mm and 3mm respectively with cylinder holders to hold 100 ml and 250 ml cylinders.
The unique simultaneous tapping and rotating motion assures that the material is evenly packed.
Calculates results - Tapped Density, Compressibility Index, Hausner Ratio and Bulk Density.
Built in 16 GB SD card (expandable up to 32 GB) for report data storage
Balance Interface for sample weight transfer
Low Volume Cylinder Adapters - 10 ml, 25 ml, 50 ml Cylinders - ASTM Compliant (Optional)
100 ml SS Cylinder - USP Method III (Optional)
Customizable report file.
Result preview before printing.
Auto resume facility to continue the run-in case of short power failure.
Data downloading facility with PC based EDC 21 software.
Multilevel user management with editable privileges

Typical Specification

Test Method	USP Method I (300 tapsper minute) USP Method II (250 Taps per minute) USP Method III (55 tapsper minute) and ASTM
Tap Count Range	0-9999
Type of Drive	Direct Drive with steeper motor
Drop height	PositionI = 14, ± 2mm PositionII= 3, ± 0.2mm
Platform rotation	5-15 rotation/ minute
Display	7’’ capacitive touch screen colour display
Operating Modes	USP, User selectable
User management	1 admin ,50 users with multiple right selection
Number of Methods	100 test method non volatile memory storage
Report storage	Practically unlimited test reports with Date and time stamp
Printer connectivity	Centronics Parallel Port for Dot matrix/ desk jet printer
Serial Interface	a)RS232-1 for balance connectivity (Sartorius/Mettler )
Cylinders	b) RS232-2 for PC connectivity for data download
Optional Cylinder	1 each, 100ml& 250ml, Glass cylinder. For ASTM test - 10mL,25mL, 50mL, 100 mL and 250 mL Glass cylinder USP III :- 100mL SS cylinder
Cylinder Holder	1 each for 100 ml & 250 ml.
Optional Adapters	For ASTM test- 10mL,25mL,50mL,100mL and 250mL Glass cylinder,For USP III :- 100mL SS cylinder
Power Requirement	230VAC / 50 HZ, 45W
Environmental Operating Conditions	a) Operation: Indoor b)Temperature: Ambient to 45°C c)Humidity: 20% to 80%
Dimensions (Approx)	310 X 380 X 230 mm (W X D X H)
Dimension (Approx.)	330 X 345 X 580 mm (W X D X H)
Shipping weight (Approx)	12 kg
Real Time Clock	Yes

Tap Density Tester

Tap Density Tester TD 1025