Pico Conductivity Meter

LABINDIA offers the perfect choice of a bench -top conductivity meter for measurements in the laboratories - whether routine or at R & D level. Due to user selective temperature function, instrument calculates the conductivity at the reference temperature 25 +/- 0.1°C with linear function.

There is a 20 x 2 line back lighted LCD display which shows basic parameters. Automatic range selection for faster measurement and automatic evaluation of cell constant with standard solution is available in Pico conductivity meter. Labindia Conductivity meter has a user selectable temperature coefficient for automatic temperature compensation through special TEMPCO key.

Get Quote
Get Quote
X
Request Demo
Request Demo
X
Call Now
Call On: 9136909578
Sales Support: sales.mfd@labindia.com
Pico Conductivity Meter
Standard Features of Pico Conductivity Meter
  • Advanced micro controller based user-friendly state-of-the-art design.
  • Complies with USP and DIN standards.
  • Sleek moulded cabinet with alphanumeric splash waterproof polyester keyboard with soft keys.
  • User interactive software in dialogue mode for ease of operation with protection against invalid entries.
  • 20 x 2 line back lighted LCD display.
  • Measurement Modes: Conductivity, TDS, Salinity (optional) and temperature.
  • Simultaneous measurement of conductivity and temperature.
  • Non-volatile memory storage of conductivity, TDS and salinity - 40 readings each with temperature in pre-selected GLP or Non-GLP format.
  • Password protection for calibration data and stored readings.
  • Calibration data with date stamp for authentication.
  • Calibration reminder alarm.
  • Alphanumeric entries of sample name, identification number for authentication.
  • Automatic Range selection for faster measurement from 0.01 ?S to 199.9mS with conductivity cells having constants 0.1, 1.0 and 10 K.
  • Automatic evaluation of CELL constant with standard solution.
  • User selectable temperature coefficient for automatic temperature compensation, through special TEMPCO key.
  • Input stability indicator for reproducible results.
  • Built-in-real time clock (RTC) for time display and on report printout.
  • Factory entered CUSTOMER NAME on report printouts for authentication.
  • Error indication helps user to trace the problem.
  • Audible beep indication during valid key operation.
  • PC compatibility for data downloading (Optional).
  • Combined pH and conductivity instrument is available.
Typical Specification
Parameters
Pico Conductivity Meter
Conductivity
Measuring Range

Autoranging 0.01µS/cm to 199.9 mS/cm.
(Depending on the cell used 0.1/1.0/1O K)

Resolution

0.01 (displayed)

Accuracy

0.5%

Temperature

Temperature Range : O to 150°C
Resolution : o.1°c
Relative accuracy : ± - o.2°c
Sensor : RTD P1100
Temp. Compensation : Automatic / Manual.

Display

20 x 2 line back lighted LCD display

Keyboard

Alphanumeric splash waterproof polyester soft keys

Report format

(a) Calibration report
(b) Report of all selected Conductivity, TDS and Salinity readings

Input

2 - Banana socket for conductivity electrode, 1-ATC-PT100

Output

a) Printer: Parallel Port
b) RS 232C :PC connectivity

Environmental Operating Conditions

a) Operation : Indoor
b) Temperature :Ambient to 45°C
c) Relative humidity: 5to 90% non-condensing.

Power Requirement

230 Vac, +_10%/ 50Hz.,10 W

Dimensions

305 x 220 x 70mm x Dx H)

Weight

2.2 kgs

TDS & Salinity Mode (Optional)

Range : 0.1PPM - 99.9 PPT (GIL)
Resolution : 0.01
Accuracy : 0.5%
TDS Factor : 0.4-0.9

 

LABINDIA reserve the right to change specification without notice as part of its continuous product development.

pH & Conductivity Meter