Disintegration Tester DT2000D

Disintegration test is intended to demonstrate the complete powder formation of the solid formulation. Labindia has introduced a novel Tablet Disintegration Tester for testing the disintegration time of tablets, capsules, and other solid dosage forms.

Call On: +91 9136909578

Sales Support: sales.mfd@labindia.com

Service Support: servicecoordinator@labindia.com

Standard Features of Disintegration Tester DT2000D

7” Colour High resolution display with touch screen interface & user interactive software
Designed to meet specification of USP, IP, BP and other Pharmacopoeias
DT2000D features a dual timer (baskets will have individual timer) and a dual drive (each Basket is driven by individual drive)
Specifically designed for use in the production and quality control of normal, plain, coated tablets & gelatine capsules
Provision to identify the position of disintegrated tablet with laser marked numbers on basket assembly.
Two different types of samples can be analysed simultaneously.
Capability of dual buffer disintegration test.
Practically Unlimited test reports with date and time stamp.
External temperature sensors available for individual beaker.
Disintegration time for individual tablets can be recorded.
Programmable Temperature & Time settings.
Park out facility for basket after run completion
Moulded, clear acrylic water bath with illumination for better visibility.
Audible and visible indication of low water level for safety.

Typical Specification

Drive	Dual Drive for 2 baskets with individual timer
Dip Speed	30, ±1 DPM
Stroke length	55, ± 2mm
Waterbath temperature range	Ambient +5 to 55°C
Waterbath temperature accuracy	± 0.2°C
Waterbath circulation	Immersion Pump
Beaker volume	1000 ml
Basket	2X6 test positions(10 mesh) USP type A/ (Optional 40 mesh) 2X3test positions (10 mesh) USP type B/ Bolus 3 Basket 2X1test positions (10 mesh) USP type B/ Bolus 1 Basket
Fluted Disk	6 numbers in each basket for USP type A
TestMode	Programmable Time up to 99:59 (HH:MM)Display Format 99:59:59
Display	Built-in SD Card
Printer connectivity	7’’ Capacitive touch screen colour display
User management	1 admin ,50 users with multiple rights selection
Number of Methods	100 test methods
Report storage	Built-in SD Card
Printer connectivity	Centronics Parallel Port for Dot matrix/ desk jet printer
Serial Interface	RS232C-2 for PC Connectivity for data download
Power Requirement	230VAC / 50 Hz, 325 W
Environmental Operating conditions	a) Operation: Indoor b)Temperature: Ambient to 45°C c)Humidity: 20% to 80% d)Altitude: up to 2000m
Dimension (Approx.)	330 X 345 X 580 mm (W X D X H)
Shipping Weight (Approx.)	22 kg.

Tablet Disintegration Tester

Tablet Disintegration Tester DT 1000 Tablet Disintegration DT 1000 ⁺